Cat6A - Cat7 Connectors - Shielded - 50 Pack

(No reviews yet) Write a Review
Typically ships direct from the manufacturer within 1-3 days
1.00 LBS
Adding to cart… The item has been added

RJ45 Shielded Connectors – For a CAT6A or CAT7 Shielded Cable

1.35 to 1.45mm ID - 50 Pack

This Shielded RJ45 Connector pack is made for use with larger gauge wire when terminating CAT6, CAT6A, and CAT7. Our RJ45 Plugs are made with high standards, keeping our customer and their network in mind. Even with something as small as an RJ45 modular plug, it must be made right and it must work right. These shielded RJ45 connectors work with solid and stranded cable with 8 pins (gold plated) and 8 conductors. These modular plugs are ideal when used with either solid or stranded copper cable that is 22 to 26 gauge. The overall outside diameter of 1.35mm - 1.45mm (typically most CAT 6A and CAT 7 bulk cable is of this larger size). For the best result, we recommend using these connectors along with one of our bulk shielded products, such as our F/UTP or STP Ethernet cable lines which reduce crosstalk and other interferences and most of which is UL listed.



  • Ideal for creating superior high performance CAT6A or Cat7 shielded cables
  • Meets CAT6A performance requirements per ANSI/TIA-568-B.2-10
  • Robust shield termination and strain relief allow for one-step termination process
  • Optional slimline boot features integrated strain relief and latch protection
  • UL 94-V0 plastic components
  • Transparent housing for easy conductor alignment
  • 8 Pins and 8 Conductors (8p8c)
  • 50 micro-inch gold plated contacts
  • Fits 26 - 22 AWG cables / wires
  • Fits cables with a jacket OD of under 8.0 mm
  • Copper alloy shielding
  • RoHS compliant
  • Operation temperature: -20°C - 50°C
  • Fits an insulation diameter of 1.35mm - 1.45mm


Electrical Specifications

• UL Applications: 250 Volts AC Max., at 2 AMPS

• Dielectric With Standing Voltage: 500 Volts AC

• Insulation Resistance: 100 M Ω

• Termination: Resistance 20m Ω Max After Environmental Testing

Mechanical Specifications

• Cable-To-Plug Tensile Strength: 20 Pound Min.

• Durability: 200 Matting Cycles

• Operation Temperature Range: -20°C~+50°C

Physical Characteristics

• Housing: Polycarbonate, UL94V-0

• Color: Transparent • Contact Blade: Copper Alloy

• Conductor: Stranded & Solid Wire, 22 - 26 AWG

(Plug Can Be Used For Wire OD’s Of Under 1.5 mm & Cable Out Jacket OD Should Be Under 8.0 mm) • Gold Plating: 50µ” • Shielded Shell: Copper Alloy