Hand made direct burial shielded CAT6 CMXT Rated cables.
Be sure to get a shielded cable to ensure it's the best if you're going to bury it!
Each cable we build is individually made to order and tested before being shipped, that being said please allow 3 to 5 days (on average) when ordering.
Made from Black CMXT, shielded direct burial cable w/Drain Wire, Dual Jacket, UV Rated, 8-Conductor, 24AWG, Solid-Bare Copper.
Are you looking for a rugged Cat6 direct burial cable (DBC) that can stand up to the elements and be directly buried in the ground? If so you have come to the right place. Our line of CAT6 outdoor rated, direct burial patch cables are designed to last where standard indoor cables fail. Each cable is comprised of 23AWG solid bare copper wire arranged in 4 twisted pairs, a foil shield and drain wire to cut down on electrical interference. This multipurpose cable can be used in Outdoor, Outside Plant, Above Ground as well as Direct Burial. These high quality direct burial cables are terminated by hand right here in our central Indiana location. Each individual Ethernet cable is fully tested prior to shipping to ensure maximum performance.
Because these network cables are indeed built to order there may be a lead time of several days depending on many factors, if time is crucial please contact us to discuss specifics so we can do our best to meet your deadline.
Features:
- Hand Made in the U.S.A.
- Supports 10/100/1000BASE-T applications
- Fast Ethernet and 155Mbps TP-PMD/CDDI
- Outdoor UV-resistant / Waterproof jacket
- Direct Burial / Dual Jacket
- 550-MHz bandwidth supporting wide range of applications
- 23 AWG Solid Copper Conductors
- Exceeds ANSI/TIA-568.2-D and ISO/IEC 11801 specifications
- CAN/CSA-C22.2 No. 214, RoHS compliant
- ETL listed
Technical Data
Construction
Pairs: 4
Conductors: 8
Rip Cord: Nylon
Drain Wire (Tinned Copper): 0.016 in. (0.40 mm)
Separator Material: High Density Polyethylene (HDPE)
Screen: Foiled (F/UTP)
Conductors
Material: Solid Bare Annealed Copper
Size: 23 AWG
Insulation
Diameter: 0.0440 in. (1.12 mm)
Average thickness: 0.0118 in. (0.30 mm)
Inner Jacket(Gray)
Material: Polyvinyl Chloride (PVC)
Outer diameter: 0.28 in. (7.30 mm)
Average thickness: 0.0196 in. (0.50 mm)
Outer Jacket (Black)
Material: Linear Low Density Polyethylene (LLDPE)
Outdoor rating: UV-resistant
Outer diameter: 0.36 in. (9.20 mm)
Average thickness: 0.0255 in. (0.65 mm)
Mechanical Characteristics
Before Tensile Strength (Mpa): ≥14.8 MPa
Elongation After Aging (%): ≥100
Aging Conditions (º C × h): 100x240
Tensile Strength After Aging (Mpa): ≥85% of unaged
Elongation After Aging (%): ≥50% of unaged
Cold Bend (-40±2º Cx4hrs): No Crack
Maximum Pulling Force: 100 N
Minimum Bending Radius: 8XOD
Electrical Characteristics
Operating temperature: -40 °F–167 °F (-40 °C–75 °C)
Safety
FPA 70 (NEC®) fire rating: CMX
