Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 3 - 9 and get $1.39 off
- Buy 10 or above and get $2.78 off
We have qty. discounts in place, need 25 boxes or more, give us a call!
Red STP CAT6 Cable, Solid 1,000 ft. bulk pull box
STP or Shielded Twisted Pair CAT6 cable is probably more cable than the average home user needs but in the workplace it may be the ideal (or even the only) solution available. The Mylar foil shielding protects your data as it travels through the four twisted pairs of 24 gauge solid copper wires by wrapping it in a thin metal sleeve thus keeping electrical interference from things like fluorescent lights and electrical lines found in a drop ceiling or inside walls at a minimum. Cables For Less CAT6 Shielded Cable comes in a variety of colors.
Our Bulk STP Cable comes packaged in a pull box, providing you with 1000 feet of high quality, shielded, 4-pair, solid, 550 MHz Cat6 Cable, ready for termination and routing. Simply pull the length required for your installation straight from the box and terminate at your leisure. These boxes are a great aid in large scale network installations and other long distance cable runs. And like all of our bulk networking CAT5 or CAT6 Cables, these are constructed with only high-quality components that can be counted on for high performance! So let us help you make the connections you need, and help us save the world... from high priced cables.
STP cable, short for shielded twisted pair, is typically used to reduce electrical interference. Because most cable that is ran through a building is not crossing over fluorescent lights or draped over electrical wires the shielded cable is not commonly used and the plenum version of this cable which is intended to be used in plenum spaces (areas such as heating ducts etc. which allow fire and smoke to travel quickly) can be quite expensive since it is coated with a jacket that reduces the levels of toxicity in the smoke and is less common.
Of course check with the proper agencies as well as consulting your county, city, state or federal guidelines before assuming anything in regard to what cable is the right cable for your application.
Still have questions? Check out this helpful link we've put together...
*All images used are for illustration purposes only and may not represent the actual product.
Click here to download the Spec sheet for this product.
- 550 MHz, shielded, solid Cat6 cable
- Shielded Twisted Pair to reduce crosstalk and interference
- 4 pair, 24 AWG (gauge) Solid Copper Conductors
- 1000 foot length, Un-terminated
- Exceeds TIA/EIA 568-C.2, ISO/IEC 11801
- Gigabit Ethernet Ready
- Riser Rated PVC Jacket, CMR
- RoHS compliant / ETL verified
- Pull Box, simply pull what you need, as you need it
- Incremental markings every 2 feet
- Easily Identified Color-Striped Pairs
While terminating Category 6 twisted pair cables be sure the natural twist of each pair is carried through as close as practical to the point of mechanical termination. TIA/EIA 568-B.2 requires no more than 0.5 inch (13mm) untwisted for Category 5E as it will effect performance at high bit rates. Cabling should be secured and placed in a manner which prevents kinking and tight cinching. Do not excessively bend the cable greater than four times the cable diameter. Cabling should not be subject to greater than 25 pounds of pulling tension (110N).
For snag resistant operation the box must be handled and stored in the upright position. Be sure to dispense / pull cable while the box is in the upright position only. For ideal conditions this cable must be stored at or above 32 degrees fahrenheit 48 hours prior to installation.
Do you have questions regarding the compatibility or functionality of this product? Or are you looking for another cable, connector, or peripheral device? Please contact us and we will work with you on a one-on-one basis to resolve any dilemma you may have and find the product that you need!